SD Zaku and Charagguy Momo snapfit

I just finished snapfitting these two little Gunpla kits. Actually I applied thin cement on the seam line parts already while assembling. I will wait for the thin cement to fully cure until tomorrow, before sanding it off.

SD Zaku II

The SD Zaku is super nice. It has skeleton of sorts. It was a fun quick build. There are seamlines on the forearms, legs and skirts. I applied thin cement and letting it cure already.

However there are NO seam lines on the gun and bazooka. That was a surprise!

The black chest part, albeit seems hard to pull out is easy to remove. Very good for disassembly once I paint it. Hollow parts are not as obvious as previous SD models. The back of the hands and the missile pods are the only hollow areas of the kit. They are not visible at the front ( which is good, if you don't want to fill the hollow cavities ).

I might add a few rivets or holes here and there before painting. I will paint this SD Zaku with Vallejo Mecha Colors and will weather it like I normally do.

Can't wait for the thin cement to cure, so that I could clean up the nub marks and mold lines.

Charagguy Momo

This cute little pink kit is so... hmmm... cute!

There are no hollow cavities to fill except the ribbon at the back. Bandai also added a wide panel line across the head, so that you do not need to remove a hideous seam line. The hair piece at the back, the legs and the body have seam lines to fix tho. I have applied thin cement on them during assembly already.

Be careful with the pink ear parts and the pink chest part. Do not put them on if you plan to paint them separately. They are a pain to snapfit. Good luck to me if I can still remove the pink part of the ears.

I did not assemble the Beargguy / Petitgguy head, the Beargguy hand and the chair. I have no plans of painting them. I added the "eye" stickers just to see how cute it is. But I will hand paint the eyes during painting.

I plan to paint the onesie body with Silver Pink Vallejo Color Shift Color. This kit will be bling bling once finish. Will paint the hair parts, face, ribbon and eyes with Vallejo Mecha Colors.

That's it! 

That's it! As I've said, I will let the thin cement cure for a day, before sanding the seam lines off. Will also clean the nub marks and add a few rivets / holes on both kits.

Thanks as always for dropping by! Until next update guys!

Cheers!

SHOUTOUT as usual!

I only use Vallejo Acrylic paints in all my builds - Acrylicos Vallejo

I get some of my tools from HOBBYMATE Singapore - HobbyMate at Facebook

And get my Vallejo paints from Neutral Grounds Philippines - Neutral Grounds Philippines

I only use Harder & Steenbeck for airbrushing - Harder & Steenbeck Airbrush